Fluorescent lighting fixtures – In some areas of your house, such as the kitchen, it is customary to have fluorescent lamps. But, would you know how to install a fluorescent if it melts the one you already have? Fluorescent tubes contain a very toxic powder that gives it that characteristic light. If you ever break one, do not inhale it and if it has caused you any cut, go to the emergency room to get cured.
You are going to install fluorescent lighting fixtures in a cellar with a wooden roof and that is why you have chosen a lamp with the air pipes and the ceramic ceiling, but in any case the components will always be the same. Behind the ceiling you can see the reactances and the primers, one for each tube. Some lamps carry a single reactance and a single primer, but the operation is identical.
You have to look for the point of the room on the ceiling that is closest to the point of fluorescent lighting fixtures. You put the support with a pencil to mark the holes where the screws go and began to drill the ceiling with a drill hammer. You will insert the plastic plugs into the holes (if it is a false ceiling they will have to be special for plaster) and you will screw the support to the ceiling.